Basic HTML Version
14
技术规格
以
CAM-BUS
为通讯方式的电子控制系统，控制各功能单元；
花型编制和管理，机器参数设置，生产统计和管理，
停车寻纬方式，数据交换，双向数据通讯等。
织机型号
起圈形式
名义门幅
门幅减少
速度
生产品种
可织造纱线
梭口形式
经轴
纬纱选色
储纬器
打纬
纬密
送经
卷取
开口机构
寻纬机构
布边机构
纬纱控制
经纱控制
卷布
润滑
主传动
机器控制
电子控制的托布板和摆动后粱罗拉同步运动
的布面游动式起圈系统
用于可变毛圈高度的
VRT
电子起圈系统（选购件）
毛巾剑杆织机
1900-2100-2300-2600-3000-3200-3400-3600mm
标准
600mm
，可以选配
1000mm
最高
540
转/分
最高入纬率
1350m/min
各种毛圈织物
对于单经轴：
800mm
地经轴-
1000mm
毛经轴
1000mm
地经轴-
1250mm
毛经轴
地经轴和毛经轴均配置快速换轴系统
4-8-12
色，按需要选配
电子分离式纱圈储纬器
积极式共轭凸轮驱动
4-84
纬/厘米
在
4-84
纬/厘米范围内可按花型要求程控变换纬密
积极式电子马达送经机构
与卷取同步
积极式电子马达卷取机构
与送经同步
电子多臂(最多
20
片棕框)
电子提花
电子控制的正反向马达驱动
此马达也用于慢速驱动
两根纱的绞边。独立废边及绞边装置
选购件:用于多臂机（最多
19
片棕框）和提花机的的开口形式
独立织边装置。
高灵敏度电子探纬装置，具有防双纬功能。
独立的经停装置
4(2+2)
经停杆
快速更换卷布辊，最大直径大为
500mm
可配机外卷取（选择件）
传剑箱、打纬箱、起毛箱中采用油泵强制润滑
送经和卷取采用油浴润滑
3
相
7.6KW
马达，电磁离合器制动
Type of machine
Rapier weaving machine for terry cloth.
Loop formation
Cloth-fell system with electronic drive for the synchronous
motion of the fabric support and whip roll.
VRT electronic system for the pile ratio variation(optiona) .
Nominai widths
1900-2100-2300-2600-3000-3200-3400-3600mm.
Width reduction
600mm standard,1000,mm on request.
Performances
Up to 540 picks per minute.
Up to more than 1350m/min of weft innserted.
Fabrics produced
All types of terry cloth.
Yarns woven
Single or twisted warp yams.
Spun yarns: Nm 2 to Nm 200 and
Filament yams: dtex 3000 to dtex 10(weft).
Shed geometry
Reduced dimensions,symmetrical.
Versions
For single beam versions:
800-mm ground beam and 1000-mm loop beam
1000-mm ground beam and
1250-mm loop beam.
Quick beam release (both lower and upper).
Number of colours
4-8-12 colours in any order.
Weft feed
Electronic separate-coil weft feeder.
Sley
Driven by positive coupled cam units.
Weft density
from 4 to 84 wefts/cm.
It is possible to obtain
various programmed weft densities in the patterns.
Warp let-offs
Motorised positive let-offs with electronic control,
timed with the fabric regulator.
Fabric regulator
Motorised positive fabric regulator with electronic
control,timed with the warp let-offs.
Shed formationn
Electronic rotary dobbies (maximum 20 frames).
Electronic Jacquard with cardan drive.
Pick-finding
Two-purpose motorised device with electronic
control can be programmed at will and also
used for slow motion.
Selvedges
Leno device binding with 2 ends.
False selvedge and binding controlled by a separate device.
Independent selvedge device (optional) for
the dobby version (up to max. 19 frames) and Jacquard
Weft control
High-sensitivity piezo-electric detector with double
weft control.
Warp control
Separate electric warp stop motions with 4 (2+2) rows.
Cloth Roller
On fast release roller, up to 500 mm in diameter.
External batching unit fittings on request
Lubrication
Forced lubrication for tape drive, sley cam boxes
and loop formation device.
Let-off devices and take-up regulator in oil bath.
Main drives
Rated three-phase 7.5 kW motor.
Electro-magnetic brake-clutch unit.
Machine control
Via on-board computer based on the CAN-BUS
system that drives and controls all the main textile
and mechanical functions.
Programming,management and filing of pattems.
Prgramming of all the machine adjustment settings.
Management of production and statistics.
Programming of down times and types of automatic
pick finding for every weaving requirement.
Complete compatibility with data acquisition systems
and two-way communication.
单纱或合股经纱
短纤纱：
2-200Nm
长纱:
3000dtex -10 Dtex
(纬纱)
对称梭口
Technical specifications